Pyrolysis chamber and ash container
Level measurement in the pyrolysis chamber and in the ash discharger
Process data
Measuring task:
Level measurement
Measuring point:
Container
Measuring range up to:
2.5 m
Medium:
Hot ash
Process temperature:
+40 … +200 °C
Process pressure:
0 … +2 bar
Special challenges:
Measurement through narrow chute, poorly reflecting medium, measurement during filling
Application
Waste incineration converts domestic and commercial waste into combustible gases and ash. Pyrolysis is carried out in the absence of air at temperatures up to 500 °C. The intermediate product, charcoal, is then further burned by adding air. Ash and synthesis gas with high thermal content are the end products. For continuous operation, the vessel must be loaded and emptied automatically. To this end, the level of material in the pyrolysis chamber and in the ash pan has to be measured.
Your benefit
Reliable
Reliable backup detection in the chute
Cost effective
Optimal utilization of the ash container volume
User friendly
Low maintenance requirements thanks to non-contact measurement
Recommended products
VEGAPULS 6X
Level measurement with radar in the pyrolysis chamber and ash container
- Reliable measurement, even with high temperatures and poorly reflecting medium
- Unaffected by dust, smoke and other harsh environmental conditions
- Maintenance-free thanks to non-contact level measurement
- Integrated air-purge connection for automated cleaning
Measuring range - Distance
120 m
Process temperature
-196 ... 450 °C
Process pressure
-1 ... 160 bar
Close