VEGACAP 64
Capacitive rod probe for level detection of adhesive products
Rod probe, fully PTFE insulated
|
|
Application area
Your benefit
- Reduced number of cleaning cycles through measurement insensitive to buildup
- Long lifetime and low maintenance requirement through robust construction
- Reliable measurement with strong buildup through optimized construction
Configure product
Product comparison
All documents and software for this product can be found in our Download Center.
Show all downloadsOther applications
- - [Meter - Foot]
- -50 ... 200 °C [°C - °F]
- -1 ... 64 bar [Bar - kPa - psi]
- PTFE insulation
- PTFE
- 316L
- Alloy C22 (2.4602)
- Steel C22.8
- ≥ G¾, ≥ ¾ NPT
- ≥ DN25, ≥ 1"
- no media contact
- Plastic
- Aluminium
- Stainless steel (precision casting)
- Stainless steel (electropolished)
- IP66/IP68 (0,2 bar)
- IP66/IP67
- IP66/IP68 (1 bar)
- Relay (DPDT)
- Contactless electronic switch
- Transistor (NPN/PNP)
- Two-wire
- -40 ... 80 °C
- ATEX / Europe
- FM / USA
- EAC (GOST) / Belarus
- EAC (GOST) / Kazakhstan
- EAC (GOST) / Russia
- IEC / worldwide
- NEPSI / China
- UKR Sepro / Ukraine
- CSA / USA and Canada
- CCC
- Intrinsic safety "i"
- Flameproof enclosure "d"
- Dust explosion protection through housing "t"
- FDA
- ABS
- BV
- CCS
- DNV
- LR
- RINA
- RMROS
- WHG
- VLAREM II
- SIL2
- Pluggable display module PLICSLED
Drawing generator
Generate 2D and 3D drawings for your specific configuration.
Configure NowProduct catalog
Capacitive
Product information
VEGACAP 62, 63, 64, 66, 69
Specification sheet
VEGACAP 64
Relay (DPDT)
Operating instructions
VEGACAP 64
Relay (DPDT)
Drawing generator
Further downloads for this product
All documents and software for this product can be found in our Download Center.
Show all downloadsPLICSLED
Universal display module suitable for all sensors of the VEGA plics® family with relay output
Show ProductVEGATOR 141
Transmission of 4 ... 20 mA signals for level signalling
Show ProductVEGATOR 142
Transmission of 4 ... 20 mA signals for level signalling
Show ProductSeal adapter set for VEGACAL / VEGACAP 62, 63 and 64
Process fitting adapter VEGACAP/CAL60
Seal adapter set for VEGACAL / VEGACAP 62, 63 and 64
Process fitting adapter VEGACAP/CAL60
Electronics VEGACAP series 60
Process component VEGACAP 64
An error has occurred
An error occurred when starting the configurator. We have documented the error and are working on it.
Please try again later. Alternatively you can contact us directly.
Thank you very much for your understanding.
VEGACAP 64
myVEGA
With myVEGA as your personal information platform, you’ll have at your disposal numerous online functions revolving around the VEGA products.
- Configurator for the entire VEGA product range
- Information about prices and delivery times
- Order directly online
- Saving of configurations
- 2D/3D drawings of your configured instrument
- Overview of order transactions
Still no access?
Register for freeForgot password
Enter your e-mail address and we will send you a link to reset your password.
Reset password Cancel
Close