VEGASWING, VEGAVIB, VEGAWAVE: Point level measurement with vibrating level switches
VEGASWING 51
Show ProductVEGASWING 53
Show ProductVEGASWING 61
Show ProductVEGASWING 63
Show ProductVEGASWING 66
Show ProductVEGAVIB 61
Show ProductVEGAVIB 62
Show ProductVEGAVIB 63
Show ProductVEGAVIB S61
Show ProductVEGAWAVE 61
Show ProductVEGAWAVE 62
Show ProductVEGAWAVE 63
Show ProductVEGAWAVE S61
Show ProductFunctionThe basis of point level detection with vibrating level switches is a tuning fork, i.e. a vibrating fork. If the vibrating probe comes into contact with the medium, the oscillation rate changes and the vibrating level switch outputs a switching command. Vibrating level switches are used as overfill protection or empty alarm. SeriesVEGASWING 61 is mounted directly at the switching point VEGASWING 63 is the version with extension tube. The switching point can be up to 6 m away from the process fitting. |
MountingThe level switch can be installed in any position. The instrument only has to be mounted in such a way that the vibrating element is at the height of the desired switching point. ConnectionThe instrument is connected with standard cable. SetupThe sensor is a compact device, i.e. it can be operated without external evaluation. It provides a switching signal on its own. A downstream device can be actuated directly with this switching signal (e.g. a warning system, a pump, etc.). |
FunctionThe basis of point level detection with vibrating level switches is a vibrating rod or vibrating fork. If the vibrating probe comes into contact with the measured product, the oscillation rate changes and the vibrating level switch outputs a switching command. Vibrating level switches are used as overfill protection or empty alarm in bulk solids, which can be either in granulate or powder form. SeriesVEGAWAVE for up to 10 mm grain size, above that, VEGAVIB. Type 61 is installed directly at the switching point, 62 has an extension cable (max 80 m) and 63 is the version with extension tube (max 6 m). |
MountingThe level switch can be installed in any position. The instrument only has to be mounted in such a way that the vibrating element is at the height of the desired switching point. ConnectionThe instrument is connected with standard cable. SetupThe sensor is a compact device, i.e. it can be operated without external evaluation. It provides a switching signal on its own. A downstream device can be actuated directly with this switching signal (e.g. a warning system, a pump, etc.). |
Close