Crusher
Level measurement and point level detection in the crusher
Level measurement and point level detection in rock crushers
Process data
Measuring task:
Level measurement and point level detection
Measuring point:
Crusher
Measuring range up to:
5 m
Medium:
Rocks
Process temperature:
-40 … +50 °C
Process pressure:
0 … 0 bar
Special challenges:
Strong noise and dust generation, extreme abrasion
Application
Large boulders are loosened from the solid bedrock through blasting. Further steps are then required to process the rock into basic building materials such as crushed rock, gravel or sand. The large stones are crushed into different grain sizes by jaw and roller crushers. To enable economic operation and keep wear and tear on the crusher to a minimum, level measurement and limit level detection are required.
Your benefit
Reliable
Reliable measurement despite intense noise generation
Cost effective
Uninterrupted operation due to optimal filling
User friendly
Simple mounting and setup
Recommended products
VEGAPULS 6X
Non-contact level measurement with radar in the crusher
- Reliable measurement, unaffected by strong dust generation and weather conditions
- High reliability ensured by immunity to noise generated by crusher
- Maintenance-free operation using non-contact measuring method
Measuring range - Distance
120 m
Process temperature
-196 ... 450 °C
Process pressure
-1 ... 160 bar
VEGAMIP 61
Microwave barrier for level detection in the crusher
- Maintenance-free operation with non-contact measurement
- High measurement certainty, even with dust, dirt and buildup present
- Measurement is possible from the outside, right through solid plastic or ceramic windows
Measuring range - Distance
100 m
Process temperature
-40 ... 80 °C
Process pressure
-1 ... 4 bar
Close