Molten salt storage in a thermal solar plant
Level measurement in the molten salt storage tank
Process data
Measuring task:
Level measurement
Measuring point:
Tank
Measuring range up to:
30 m
Medium:
Molten salt
Process temperature:
+300 … +400 °C
Process pressure:
0 … 0 bar
Special challenges:
High temperatures, density changes
Application
The important criterion for the location a thermal solar plant is gaining the optimal amount of sunlight energy available at that site over the year. Molten salt is used to store this thermal energy produced on the days when there is abundant sunshine, this enables the production of electricity even on days with little or no direct sunlight via a heat exchange process. This molten salt is usually stored in two large vessels. One vessel contains salt at a lower temperature (approx. 300° C), the other contains salt at a higher temperature (approx. 400° C). Accurate level measurement is essential to monitor the system capacity.
Your benefit
Reliable
Reliable level measurement ensures smooth operation
Cost effective
Large storage reserves available through optimal utilization of tank volume
User friendly
Maintenance-free through non-contact measuring method
Recommended products
VEGAPULS 6X
Non-contact level measurement with radar in a molten salt storage tank.
- High measuring precision, independent of product properties
- Reliable measurement for extremely high temperature ranges
- Maintenance free due to contactless measurement
Measuring range - Distance
120 m
Process temperature
-196 ... 450 °C
Process pressure
-1 ... 160 bar
Close