email public

VEGASON: Ultrasonic level measurement

In non-contact ultrasonic level measurement, the sensor emits ultrasonic pulses in the direction of the medium, which then reflects them back.
The elapsed time from emission to reception of the signals is proportional to the level in the tank. Ultrasonic sensors are ideal for simple standard applications, both for liquids and for solids.

Step by step to the right sensor

What would you like to measure?

{{selection.Description}}

Product catalog
Level
Radar Guided Wave Radar Ultrasonic Capacitive Hydrostatic Radiation-based MLI Bridle
Switching
Pressure
Interface
Density
Flow
Signal conditioning
Accessory and spare parts
Products
Function
PRO
Fuellstandmessung Ultraschall VEGASON61

VEGASON 61

Measures liquids up to 5 m and bulk solids up to 2 m away

Show Product
PRO
Fuellstandmessung Ultraschall VEGASON62

VEGASON 62

Measures liquids up to 8 m and bulk solids up to 3.5 m away

Show Product
Liquids Solids

Function

In non-contact ultrasonic level measurement, the sensor emits ultrasonic pulses in the direction of the medium, which reflects them. The time from transmission to reception of the signals is proportional to the level in the vessel.

Series

VEGASON 61 = Thread 1½" VEGASON 62 = Thread 2" VEGASON 63 = Flange DN 100

Mounting

Two thread sizes and mounting aids are available for mounting the ultrasonic sensor.

Connection

The instrument is connected with standard two-wire cable.

Setup

As soon as a plausible measured value is found, the corresponding current is output on the signal line. The value corresponds to the current filling level, in relation to the maximum measuring range.

Function

In non-contact ultrasonic level measurement, the sensor emits ultrasonic pulses in the direction of the medium, which reflects them. The time from transmission to reception of the signals is proportional to the level in the vessel.

Series

VEGASON 61 = Thread 1½" VEGASON 62 = Thread 2" VEGASON 63 = Flange DN 100

Mounting

Two thread sizes and mounting aids are available for mounting the ultrasonic sensor.

Connection

The instrument is connected with standard two-wire cable.

Setup

As soon as a plausible measured value is found, the corresponding current is output on the signal line. The value corresponds to the current filling level, in relation to the maximum measuring range.



Close