email public shopping_cart 0
Select shopping cart

There are already products in the shopping cart of your user account. Which shopping cart would you like to keep?

VEGASWING, VEGAVIB, VEGAWAVE: Point level measurement with vibrating level switches

In point level measurement with vibrating level switches, a rod or a fork is set vibrating. When the vibrating probe comes into contact with the medium, the vibration changes and the vibrating level switch outputs a switching command. Vibrating level switches are used as overfill protection devices or low-level indicators in liquids as well as in granular and powdery bulk solids.
The advantages
  • Vibrating level switches are easy to install
  • Setup and commissioning is possible without medium
  • Reliable point level measurement – independent of installation position, pressure, temperature, foam, viscosity and grain size

Step by step to the right sensor

What would you like to measure?

{{selection.Description}}

Product catalog
Level
Switching
Vibration Capacitive Conductive Radar Radiation-based
Pressure
Interface
Density
Flow
Signal conditioning
Accessory and spare parts
Products
Function
BASIC
Grenzstand VEGASWING51 Gewinde

VEGASWING 51

For liquids (density: > 0.5 ... 2.5 g/cm³)

kr. 1,500.00
Base price
Show Product
BASIC
VEGASWING 53

VEGASWING 53

For liquids (density: > 0.5 ... 2.5 g/cm³) – with tube extension

kr. 2,022.00
Base price
Show Product
PRO
VEGASWING 61 Vibrating level switch for liquids

VEGASWING 61

For liquids (density: > 0.5 ... 2.5 g/cm³) – compact version

Show Product
PRO
VEGASWING 63

VEGASWING 63

For liquids (density: > 0.5 ... 2.5 g/cm³) – with tube extension

Show Product
PRO
VEGASWING 66 Vibrationsgrenzschalter für Flüssigkeiten bei extremen Prozesstemperaturen und -drücken

VEGASWING 66

For liquids (density: > 0.42 ... 2.5 g/cm³) – high temperature version

Show Product
PRO
VEGAVIB 61 Vibrating level switch for granular bulk solids

VEGAVIB 61

For granulated bulk solids from density 20 g/l – compact version

Show Product
PRO
VEGAVIB 62

VEGAVIB 62

For granulated bulk solids from density 20 g/l – with cable extension

Show Product
PRO
VEGAVIB 63

VEGAVIB 63

For granulated bulk solids from density 20 g/l – with tube extension

Show Product
BASIC
VEGAVIB S61

VEGAVIB S61

For granulated bulk solids from density 100 g/l

kr. 2,918.00
Base price
Show Product
PRO
VEGAWAVE 61

VEGAWAVE 61

For powdery and fine-grained bulk solids from density 8 g/l – compact version

Show Product
PRO
VEGAWAVE 62

VEGAWAVE 62

For powdery and fine-grained bulk solids from density 8 g/l – with cable extension

Show Product
PRO
VEGAWAVE 63

VEGAWAVE 63

For powdery and fine-grained bulk solids from density 8 g/l – with tube extension

Show Product
BASIC
VEGAWAVE S61

VEGAWAVE S61

For granulated bulk solids from density 100 g/l

kr. 2,918.00
Base price
Show Product
Liquids Solids

Function

The basis of point level detection with vibrating level switches is a tuning fork, i.e. a vibrating fork. If the vibrating probe comes into contact with the medium, the oscillation rate changes and the vibrating level switch outputs a switching command. Vibrating level switches are used as overfill protection or empty alarm.

Series

VEGASWING 61 is mounted directly at the switching point VEGASWING 63 is the version with extension tube. The switching point can be up to 6 m away from the process fitting.

Mounting

The level switch can be installed in any position. The instrument only has to be mounted in such a way that the vibrating element is at the height of the desired switching point.

Connection

The instrument is connected with standard cable.

Setup

The sensor is a compact device, i.e. it can be operated without external evaluation. It provides a switching signal on its own. A downstream device can be actuated directly with this switching signal (e.g. a warning system, a pump, etc.).

Function

The basis of point level detection with vibrating level switches is a vibrating rod or vibrating fork. If the vibrating probe comes into contact with the measured product, the oscillation rate changes and the vibrating level switch outputs a switching command. Vibrating level switches are used as overfill protection or empty alarm in bulk solids, which can be either in granulate or powder form.

Series

VEGAWAVE for up to 10 mm grain size, above that, VEGAVIB. Type 61 is installed directly at the switching point, 62 has an extension cable (max 80 m) and 63 is the version with extension tube (max 6 m).

Mounting

The level switch can be installed in any position. The instrument only has to be mounted in such a way that the vibrating element is at the height of the desired switching point.

Connection

The instrument is connected with standard cable.

Setup

The sensor is a compact device, i.e. it can be operated without external evaluation. It provides a switching signal on its own. A downstream device can be actuated directly with this switching signal (e.g. a warning system, a pump, etc.).



Close