We bring colour into view!
Simple. Practical.
Welcome to your special VEGAPOINT Prove a Point page
Thanks for taking a unit to try out on your process, we hope you will like its design, operation and features. We look forward to getting your feedback in due course.
Point Level Switching - out of the box for any conductive (i.e. water-based) liquids OR any liquids, or gels (even light bulk solids) with a small adjustment
Interface or Foam Detection - Oil and Water Foam or Water, or any two liquids with different electrical properties
Dual Interface Detection - What’s in my vessel or pipe line? e.g. Air/Foam/Water, Air/Oil/Water using the twin NPN/PNP outputs or I-O Link
Below are some ‘how to videos’ to help you get started for any of these applications, explore or adjust switch lighting colours and flashing signalling options. Try the award winning VEGA Tools App for simplicity and ease of use.
The other option is arrange a training session with one of our sales team, they can do an online or in person session as required, let us know here.
If you want to know more about the specification of your VEGAPOINT 21, then scan the small QR code on the device or enter the Serial Number in your VEGA Tools App, this will allow you to find out the specification or, alternatively, look at the pdf below.
Device Configuration - VEGAPOINT 21Installing in your process
A range of off-the-shelf process adapters are available
At this moment we trust you are looking at your new device in its box and getting ready to install it! Of course you will need a suitable M12 connector cable, we assume you have these already and the system to integrate it into. If you don't, please get in contact here.
Now you have it ‘in your hands’, you may realise that you need a different process fitting, don't worry we have a range of adapters. If you didn't order one when you filled out the survey questions, get in touch here - we can still help with one.
Hygienic-adapter-for-G-1-2Setting it up
On 95% of point level applications your VEGAPOINT 21 will work out of the box.
You may need to set it up for the following applications:
- Fine tuning on very low conductivity or highly adhesive products
- On interface and detection applications – oil water, air/water/foam
- Or if you simply want to set up different notification colours on the level switch
If you want to connect to set it up, or just explore the options and capabilities, that's what it’s all about. Hopefully you have already downloaded the VEGA Tools App for your iOS or Android device. If not, follow the links below:
Need anything else?
If you have any questions at all, or you want to do a one to one demo, or someone to make a safe and distanced visit to site to help you out get in touch here.
Close