Improving Level Control in the CCR and PDH Unit with Non-Intrusive Radiometric Instruments from VEGA

Radiometric technology is the most reliable form of instrumentation used in the CCR since it is non-contacting to the process and not exposed direction to the high temperatures and abrasive conditions in the CCR. The function of VEGA’s radiometric instruments is to provide inventory control of catalyst coming from the process unit and to control batched volumes as it passes through the regeneration process which ensures catalyst re-activation is continuous and reliable. The purpose of controlling the batched volumes has two reasons: the first is to ensure that the catalyst is entirely regenerated before re-introduction to the operating process unit & the second is to maintain minimum pressure drop between vessels in the CCR, so that the material proceeds through the unit without added unwanted mechanical force.

The spent catalyst then moves to the regeneration section of the unit where the catalyst is cleaned of process deposits and where chemical activation will occur. Similarly, a continuous level measurement and low level switch are used to control the batch of catalyst as it proceeds through the CCR. The radiometric point level measurements in particular can be calibrated to change state at very specific conditions against the mounding of the catalyst material. This allows for optimized process control of the regeneration process.

Once the “like new” catalyst reaches the final stage it is captured and stored in the Regenerated Catalyst Storage Hopper. From here it will be re-introduced to the operating unit via pressurized gas flow, in a batching method to ensure the proper volume of catalyst remains inside the operating vessels. Radiometric level and point level instruments are used to ensure optimal utilization of regeneration capacity and efficient usage of regenerated catalyst volume. 

There are additional lock hopper vessels that accept reprocessed catalyst as it passes between the Regenerator and the Regenerated Catalyst storage vessel that also utilize radiometric instrumentation. The function again is to maintain a pressure barrier between upstream and downstream vessels. The pressure differential comes from the higher pressure needed to push the regenerated catalyst back into the operating vessel.