Medium-sized silos for bulk solids
Level measurement and point level detection in silos
|
|
Process data
Measuring task:
Level measurement and point level detection
Measuring point:
Silo
Measuring range up to:
15 m
Medium:
Fine-grained bulk solids
Process temperature:
-40 … +200 °C
Process pressure:
-1 … +6 bar
Special challenges:
Dust, filling noise, changing media properties
Application
Many different kinds of bulk solids are produced or used as raw materials in the chemical industry. To ensure reliable measurement of the silo contents, several factors must be considered: different bulk densities, abrasive properties, dust generation and the requirements of explosion protection. Application of the right level sensors ensures optimal production planning and reliable logistics for the finished products.
Your benefit
Reliable
Reliable measurement, independent of media properties and container geometry
Cost effective
Maintenance-free operation
User friendly
Universally applicable for almost all non-abrasive bulk solids
Recommended products
VEGAFLEX 82
Continuous level measurement with guided radar in bulk solids silo
- Simple calibration and universal application in containers of medium height
- Robust cable design ensures maintenance-free operation in widely different media
- Unaffected by changing process conditions
- Dust deposits on the process fitting or on the cable have no effect on the measurement
Measuring range - Distance
75 m
Process temperature
-40 ... 200 °C
Process pressure
-1 ... 40 bar
VEGAWAVE 63
Vibrating level switch for point level detection of fine-grained bulk solids in bulk solids silo
- Universally applicable for all fine-grained bulk solids
- Wear and maintenance-free operation
- Simple, adjustment-free setup
Measuring range - Distance
-
Process temperature
-50 ... 250 °C
Process pressure
-1 ... 25 bar
Close