Hydraulic oil reservoir tank
Level measurement in the reservoir tank for hydraulic oil
|
|
Process data
Measuring task:
Level measurement
Measuring point:
Tank
Measuring range up to:
2 m
Medium:
Hydraulic oil
Process temperature:
0 ... +50 °C
Process pressure:
0 … 0 bar
Special challenges:
Changing composition of the hydraulic oil
Application
The hydraulic oil used to transmit power circulates in a closed system. However, it is gradually lost due to lubrication points and leakages in the power equipment. To ensure optimum operation of the power equipment, the level in every hydraulic oil reservoir tank must be monitored for replenishment.
Your benefit
Reliable
Reliable measurement unaffected by medium
Cost effective
Continuous operation of the power equipment is assured
User friendly
Simple installation
Recommended products
Solution 1
Solution 2
VEGAFLEX 81
Level measurement with guided radar in the hydraulic oil reservoir tank
- Precise measurement, independent of media properties
- High measurement reliability even with buildup
- Simple setup and commissioning saves time
Measuring range - Distance
75 m
Process temperature
-60 ... 200 °C
Process pressure
-1 ... 40 bar
VEGAPULS 6X
Level measurement with radar in hydraulic oil reservoir tank
- Precise measurement, independent of medium properties
- Reliable measurement down to bottom of vessel, even in media with low dielectric constant
- Optimal utilization of container volume thanks to small blocking distance (dead band)
Measuring range - Distance
120 m
Process temperature
-196 ... 450 °C
Process pressure
-1 ... 160 bar
Close