Non-contact level sensors ensure greater safety in environments endangered by hazardous substances

If the degree of pollution allows it, incineration of the materials can be the most sustainable option. In the EU Waste Directive, this disposal method ranks below recovery and has two main objectives: Reducing the volume of waste and destroying potentially dangerous substances. This poses considerable challenges for waste disposal companies: from the bulk handling of incoming waste to the careful monitoring and control of substances entering the environment. Special chemicals are used to purify, optimize and neutralize the process streams and residual materials. They are stored in large storage tanks at strategic points in the respective waste incineration plants.

The British town of Belvedere, near London, is the site of such a waste incineration plant. Four polypropylene tanks filled with sodium hydroxide are located on site. Every process medium is stored in large containers for long-term supply and in small day tanks for process-critical dosing and neutralization. All tanks were originally supplied with a low-cost bubbler level measuring system, which eventually failed due to corrosion and buildup. Vapours and gases escaped through the housing. Moreover, the systems were unreliable, inaccurate and very unsafe.

To ensure a lasting function, the sensor must be made of the right materials, usually expensive alloys, and equipped with special elastomer seals. When installing or de-installing a sensor, the workforce has to wear extensive protective equipment. In addition, the surrounding area must be closed off during such a procedure. These measures are necessary and involve high costs. They also pose a security risk.

The stored chemicals, especially those that are highly acidic or alkaline, are usually highly toxic, corrosive substances that can leave residues and easily outgas. Any contact with or release of such substances into the atmosphere can quickly become dangerous for personnel. At the Belvedere plant, these chemical substances are carefully monitored. Accurate level measurement helps avoid overfilling and ensures that there are enough raw materials for the process.